High impact and abrasion resistance,

Resistant to severe atmospheric conditions,

Excellent adhesion,

Easy to apply,

Excellent protection against corrosion,

Pot life (application time):

10°C 6 hours

23°C 4 hours

Drying time:

10°C 20 hours

23°C 16 hours

APPLICATION AREAS

Polymex-7011-Astar is used as a primer for Helipad Floor Coating to protect metal surfaces from mechanical and atmospheric corrosion. It is manufactured in accordance with MIL PRF 24667 Type I Composition C. Helipad Floor Primer

APPLICATION

Surface Preparation Steel Surfaces:

The application surface must be clean, dry and free of dirt. Oil and grease on the metal surface should be removed with detergent or steam, salt and other contaminants should be removed with high pressure fresh water. For optimum performance, Near-White Metal Blast Cleaning (SSPC-SP10) can be performed. After cleaning, for best results, blasting should be carried out at Sa 2½ level according to ISO 8501-1 standard.

Aluminum Surfaces:

Aluminum and light alloy surfaces are cleaned with solvent and the surface is abrasive blasted. P-7011-Helipad Floor Primer

Application Conditions / Limits

Surface Temperature: Minimum +10°C / Maximum +39°C

Environmental Temperature: Minimum +10°C / Maximum +45°C

Surface Moisture Content: Moisture content by weight < 3%Relative Humidity Up to 85%Dew Point: Surface ground temperature should be at least 3°C above the condensation point.Preparation of the mixture

Component A is mixed in itself, then all of the hardener in the small can is poured into the main material and mixed until a homogeneous mixture is obtained. The mixture should be used within 3 hours (23°C) after resting for 3-4 minutes. P-7011-Helipad Floor Primer

Application tools: 

Brush, roller, airless spray

Thinner NO THINNER.

Cleaning Equipment used with Polymex Thinner should be cleaned before the paint dries.

Health, Safety and Environment

POLYMEX's priorities are "RESPECT FOR LIFE", "PEOPLE FIRST" and "SAFETY FIRST" due to its field of activity.

In line with these principles, the company is committed to

• To comply with all applicable legal regulations regarding the environment, occupational health and safety,
• To carry out activities to minimize the use of natural resources, prevent environmental pollution and use energy resources in the most efficient and economical way for a sustainable environment,
• Taking necessary measures and making investments to create a healthy, safe and sustainable working environment,
• To prioritize environmental and occupational safety requirements in the product development process,
• To organize trainings and services to raise awareness of staff and all stakeholders on health, safety and environmental issues,
• To identify risks that threaten occupational health, safety and the environment in advance and to develop preventive measures against these risks,
• Set and regularly revise health, safety and environmental targets to ensure continuous improvement,
• Creating tools for the recovery of waste generated during processes and from products; performs controlled classification, separation and disposal operations according to waste characteristics.
• All employees take an active role in health, safety and environmental issues, play a role in achieving targets, and encourage participation in their areas of responsibility,

In line with these promises, POLYMEX has obtained ISO 14001 and ISO 45001 certificates in order to standardize and maintain its activities and continues to work to create a sustainable world with management support and personnel sensitivity. Polymex Kimya.

All technical data contained in this product data sheet are based on laboratory experiments. Actual data may vary due to conditions beyond the control of Polymex chemistry.

Polymex-7011- Helipad Floor Primer