Polymex P-3018 Rubber Adhesive

Two-component, solvent-free, polyurethane based, multi-purpose rubber adhesive. It is used as an adhesive in rubber flooring systems.

Rubber Adhesive It is a strong rubber adhesive resistant to moisture, water and chemicals. Since it does not contain solvent, it has absolutely no burning feature. Resistant to abrasion, impact, acid-alkali, sea water, most chemicals and corrosive materials. It forms a very strong layer after hardening.

It hardens at low temperatures without significant volume change. Drying time can be shortened thanks to catalysts. It is a polyurethane material with high adherence to the applied surface. It exceeds the elongation and elasticity coefficients of the applied surface. Rubber Adhesive

ColorCream - Red - Gray (Desired Color)
Hardness Shore A75 - 80
Binding SubstancePolyurethane Resin
Rubber Adhesive DensityBase Material 1.40 g/ml Hardener 1.22 g/ml
Rubber Adhesive Mixing Ratio5/1Kg by weight
Implementation Process at (23 C)45 to 55 Minutes
Solidification Start25 oC/ +40 o50 Minutes at C temperature
Rubber Adhesive Heat Resistance-40 oC/ +280 oC
Complete Cure (20c)Completes Cure after 12 hours (48 hours for complete drying)
Environmental AdaptationNo Negative Impact on the Environment.
Kürünü Tamamlama  ( 20cve %60 Realite Nem )Rubbers should be placed before the drying time expires. After a day, it can be walked on and polished.
Tensile Strength30 Kg/cm2 (DIN 53455 )
Uv Rays and Material TemperatureUV Resistant and Mim 5c

Implementation: Rubber Adhesive First, the material in the big bucket (Component A) is mixed well with a mixer. Then the hardener (Component B) in the small can is poured into the main material in the large bucket in a ratio of 5 to 1. Mix with the mixer at low speed until a homogeneous mixture is obtained. The mixture should be used between 45 minutes and 55 minutes. Apply with trowel, roller and comb. Apply Polymex two-component transparent primer prior to application on rough and damp surfaces. Rubber Adhesive

The floor surface to be applied must be smooth, dry and clean. It should be free from mineral oil, dirt, rust and burrs. Absolutely no foreign material should be added. Ambient and surface temperature during application +10 oC or below +30 oC, appropriate temperatures should be expected. Rubber Adhesive

Clean the machines and apparatus used in the application with a suitable cleaner after use.

Areas of Use: Rubber Adhesive It is a strong polyurethane adhesive used for bonding rubber coatings, ceramics, granites to the floor; for bonding rubber coatings to playground and other floors and walls. It is used for bonding all types of rubber and parquet.

Polymex-3018 gives much better results in bonding wood to concrete than other types of adhesives. Since it is a heat resistant polyurethane, it can be used in underfloor heating systems. Since it is not affected by daylight and water, its bonding feature lasts up to 20 years. It is also used in different sectors for multi-purpose in the production of top tables in the white goods sector and in the bonding of plastic evenings to chipboard. It is used for gluing plastic and sandpaper in sanders with and without handles. Except polyethylene and similar materials. Concrete, stone, wood. It is applied to all kinds of surfaces such as metal, aternite. It is a liquid impermeable antibacterial adhesive resistant to chemicals, impacts and friction. It creates a smooth surface on the applied surface and increases and strengthens the surface strength. Rubber Adhesive

Warnings : Skin contact with the hardener should be avoided. In case of ingestion, consult a doctor who can decide whether or not to wash out the stomach. It is recommended to wear protective goggles and gloves. Rubber Adhesive

Notes All technical data contained in this product data sheet are based on laboratory experiments. Actual data may vary due to conditions beyond the control of AŞY POLYMEKS KİMYA SAN TİC LTD ŞTİ. Rubber Adhesive

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Sorry, no attachment available !
architeck-subscribe-image
Subscribe to Our Mailing List
Be aware of all the campaigns and innovations
en_USEnglish