Plugging the pores on all types of concrete, wood and metal surfaces before the application of one- or two-component (depending on the area of use), polyol-based, solvent-free, matt or glossy abrasion-resistant, jointless, monolithic, polyurethane and Epoxy-based coating materials, It is an industrial and decorative type coating material that is compatible with polyurethane and Epoxy based coating materials to prevent moisture coming from below, to ensure better adhesion of the coating material to be applied on the surface and to eliminate sanding and dusting especially on concrete surfaces with low surface quality.

• It has high penetration ability into concrete.
• Aging resistant, high compressive strength and flexible.
• Protects against corrosion, resistant to alkalis and base acids.
• Not affected by fungi and bacteria.
• It is resistant to sunlight as it is not affected by UV rays.
• It has high adherence to the applied surface and is resistant to aging.
• It is resistant to water, acidic water and salt solutions, grease and petroleum and is also impermeable.
• High corrosion resistance (see Performance Tests)
• Thick throwing thanks to its high structure
• Can be used as primer, intermediate or topcoat at the same time Long coat-extension window
• Resistant to hard impacts
• Applicable to steel and concrete surfaces
• Very good adhesion values (see Performance Tests)
• TSE 11590. Chemical Resistant Epoxy Floor Coating Primer

Packaging:
5.kg 15. Kg. team 20 Kg. team 30.kg. barrel or desired weight.

Quality:
The fact that the quality of the application is at least as important as the quality of the material used constitutes the guarantee of product and application quality with the principle of "not compromising on quality" of our company. In accordance with the project requirements of the area to be insulated and coated, it is ensured that both the product Floor Primer TSE, TSEK and the applications comply with international standards (ISO 9001, EN, ASTM) with the "right diagnosis", "right product" and "right application". It is ensured that the accuracy and performance of the work is measured with quality control tests performed at every stage according to product and application requirements. POSE (TS EN1504-2)

• It is flexible and does not deform between -40ºC and +280ºC.
• It can be easily used in bottom heated areas.
• Prevents sanding and dusting and does not hold dust.
• It strengthens the applied surface.
• Provides better adhesion of the structure to be applied on the surface.
• On concrete surfaces, it has high penetration capability into concrete.
• It can create a barrier against moisture from below by filling the pores on the applied surfaces.

MMA Based Primer Chemical Resistant Floor Coating Primer It is generally used as a primer for the floor before insulation and floor covering. Polyurea Insulation and Polyurea Floor coatings. Polyurethane and Epoxy Floor coatings. It is used as a primer in Polyurethane Insulations.

It is used as a good ground and corrosion protector for all kinds of surfaces against water and chemicals, concrete, wood, eternite, stone, all kinds of metal surfaces, floor coverings of factories and workshops, concrete surfaces, before floor coverings where resistance against acid, alkali and other corrosive chemicals is desired, as a good ground and corrosion protector for the materials to be coated on it.

Mode of Application:

Duration of use is 10 minutes and the mixture should be finished within 10 minutes after mixing.

MMA Based Primer Chemical Resistant Floor Coating Primer The application area should be thoroughly cleaned from dirt, oil, rust, etc. On concrete surfaces, the surface must be dry and clean. Do not apply primer on old and worn surfaces (worn, loosened and lost mechanical strength) without making the necessary repairs. The concrete must be completely dry and cured. Use time is 10 minutes and should be finished within 10 minutes after mixing.

The main material is mixed with an electric mixer in a ratio of 2 and hardener material in a ratio of 1 for max. 2-3 minutes and made ready for application. MMA Based Primer Chemical Resistant Floor Coating Primer.

Application can be carried out by brush, roller or airless spraying method.

The application should be finished within 10 minutes.

Single coat application is sufficient. Chemical Resistant Epoxy Floor Coating Primer.

After application, a dry film layer with a thickness of 36/40 microns is obtained.

The treated surface should not be wetted, walked on and protected for at least -1- hours.

After 1 hour, coating applications are applied on the dry primer.

Consumption:

Polymex MMA Based Primer Chemical Resistant Floor Coating Primer n Consumption Gram according to the physical condition of the surface to be used (worn, very worn, etc.).

MMA Based Primer Chemical Resistant Floor Coating Primer

Polymex Chemical Resistant MMA Floor Coating Primer -Epoxy -Polyurethane It is used in Floor Primer of Floor Coatings and Insulations. The floor is cleaned and 300-400.gram per m2 should be applied to the cleaned floor. Insulation or floor covering materials are used on it. Polyurea Floor Primer is used in risky areas. Chemical Resistant MMA Floor Coating Primer.

POSE (TS EN 1504-2)

Legal Notes:

The information provided here about Polymex Construction Chemicals products and in particular their application and end recommendations for their use, under normal conditions and Polymex Construction Chemicals' recommendations in line with the principles of the Food and Drug Administration, these products are stored, handled and administered correctly. These statements are made in good faith on the basis of Polymex Construction Chemicals' existing knowledge and experience. Products, application surfaces and fields of application in practice is quite diverse. Therefore, when using Polymex Construction Chemicals, make sure that you are applying the right product, under the right conditions and in the right place, and strictly follow the information and instructions provided by Polymex regarding commercial suitability and/or fitness for a particular purpose. Otherwise, you may be liable for damages that may occur. Polymex Construction Chemicals is not responsible. The user of the product (user) should test the suitability of the product for the application and purpose for which he/she intends to use the product. Polymex Construction Chemicals reserves the right to change the specifications of its products. The property rights of third parties must be observed. All orders are subject to acceptance, sales and transportation. our terms and conditions are taken as basis. Users should always refer to the latest edition of the local Product Data Sheet for the relevant product, which can be obtained by contacting Polymex Construction Chemicals.