Places of Use (Poz no: 7.4.1)

Concrete and cement based mineral surfaces,

Normal and moderately heavy loads such as factories, warehouses, loading and unloading areas
exposed industrial areas,

Walkways, parking lots and power plants,

Hygienic facilities such as hospitals, laboratories, operating rooms, laundries and food facilities
areas,

It is used as a paint and coating material for floors and walls.

Advantages
- It has a very high adhesion strength.
- Solvent free. Dustproof Epoxy Floor Paint
- Easy to apply and clean.
- Hygienic and easy to clean.
- Resistant to mechanical loads, abrasion and chemicals.
View
Mixture (component A + B) : Ral Colors
*Differences in colors may occur due to the effect of direct sunlight. This is due to the physical and
does not affect its chemical resistance. . Polymex-5019 Non-Dusting Epoxy Floor Paint

Technical Specifications
Tüm teknik değerler +23⁰C’de ve %50 bağıl neme göre hesap edilmiştir. Sıcaklık ve nem oranı
changes change the technical values. . Polymex-5019 Non-Dusting Epoxy Floor Paint

Density Mixture Density : 1.25 kg/liter (± %3)
Viscosity Mixture : 2.000-2.500 mPa.s
Shore D Hardness 7 days: 75-85 (ASTM D2240-05)
Compressive Strength 28 days : > 50 N/mm² (ASTM D695-10)
Flexural Strength 7 days : > 30 N/mm² (ASTM D790)
Bond Strength 7 days : > 3 N/mm² (Concrete) (ASTM D7234)
Usage Time : 60-70 minutes
Full Curing Time: 7 days

Surface Preparation
The compressive strength of the application surface must be at least 25N/mm², and the strength of the floor concrete (pull ) (Poz no: 7.4.1) off) must be at least 1,5 N/mm². The floor concrete must be cured and the moisture content of the concrete must not exceed %4. The floor temperature must not be less than +8⁰C and must be at least +3⁰C above the condensation point.

The surface must be dry. It should be cleaned from dust, dirt, paint, oil and similar substances that will reduce adherence. Eyelet gaps should be filled. Oil-soaked surfaces should be cleaned with chemical cleaning materials and then the surface should be cleaned once more with a water jet. Any puddles of water remaining on the surface should be removed with vacuum cleaners. The cleaned surface should be subjected to mechanical surface abrasion such as grinding, milling, sandblasting or sanding to obtain a rough surface. The dust layer formed after mechanical cleaning should be swept with the help of industrial vacuum cleaners. Epoxy Based, Two Component, Solvent Free, Floor and Wall Paint If there is any doubt about the surface, a trial application should be made. Do not apply on wet, high humidity or frozen surfaces. Epoxy Based, Two Component, Solvent Free, Floor and Wall Paint The surface preparation should be completed on the concrete floor, primed using the appropriate POLYMEX primer material and made ready for topcoat application. Polymex-5019 Non-Dusting Epoxy Floor Paint (POS no: 7.4.1)

Implementation conditions
Anti bakteriyel  epoksi boya ve kaplama malzemesidir.Uygulama esnasında hava sıcaklığı +10⁰C ile +30⁰C arasında olmalıdır. Bağıl nem %80’den fazla olmamalı ve yüzey sıcaklığı +10⁰C ile +30⁰C arasında olmalıdır. Zemin betonu nem oranı %4’ü geçmemelidir. Zemin sıcaklığı +8⁰C’den az olmamalı ve yoğuşma noktasının en az +3⁰C üzerinde olmalıdır. Epoksi Esaslı, İki Bileşenli, Solventsiz, Zemin ve Duvar Boyası. Polymex-5019-Tozumaz  Epoksi Zemin Boyası (Poz no: 7.4.1)

Preparation of the Mixture
P-5019-Epoxy Based, Two Component, Solvent Free, Floor and Wall Paint: Before mixing, make sure that the material temperatures are between +15⁰C and +25⁰C. Component A is mixed with a low speed mixer for a reasonable time until it becomes homogeneous. Then component B is added to component A and mixed with a low speed mixer until a homogeneous mixture is obtained (approximately 3 minutes). Epoxy Based, Two Component, Solvent Free, Floor and Wall Paint In order to prevent possible mixing errors, the final mixture is placed in a clean and suitable container and mixed for the last time at low speed for a short time and made ready for use. Mixing for too long and at high speed should be avoided to minimize air entrainment. Do not add solvent etc. into the mixture during application. . Polymex-5019 Non-Dusting Epoxy Floor Paint

Application details
It is an antibacterial epoxy paint and coating material. Provided that it complies with the ideal surface and weather conditions stated above; It should not be applied in weather conditions below +10⁰C, above +30⁰C, rainy and / or windy weather. If necessary, the ambient and floor temperature should be optimized with the help of heaters. It should not be used on surfaces where moisture is released. Epoxy Based, Two Component, Solvent Free, Floor and Wall Paint Mix Polymex-5008 - can be applied to the surface primed with the appropriate primer by roller or spraying equipment. Protective health and safety equipment must be worn when using spray equipment. Ensure that a non-porous coat completely covers the surface. The application should be done in two coats and the waiting time between the two coats should not exceed 24 hours. If this time is exceeded, the surface should be roughened again before applying the second coat. For accurate and precise color matching, ensure that the same production/serial number of Polymex is used in each area. Epoxy Based, Two Component, Solvent Free, Floor and Wall Paint If heating is required, gas, oil, paraffin or similar fossil fuel heaters should not be used. These substances produce high amounts of CO₂ and H₂O water vapor, which can affect the surface appearance. Therefore, only use electric heating systems that blow warm air. At an average +20⁰C, the mixture should be consumed in maximum 30 minutes. Dustproof Epoxy Floor Paint reaches its mechanical and chemical resistance in minimum 7 days after full curing. Epoxy Based, Two Component, Solvent Free, Floor and Wall Paint Curing times of epoxy resin based products vary depending on climatic conditions. Chemical reaction time and working time also vary accordingly. Therefore, attention should be paid to these details during application. Chemical reaction slows down under low temperature conditions. This prolongs the usage time, the time the material can be coated and the working time. After the coating application is completed, the floor should be protected from direct contact with water for at least 24 hours. Otherwise, carbonation and softening will occur in the area in contact with water and this will cause the coating to lose its properties. If such a situation occurs, the entire coating should be removed from the floor and re-applied. Anti-bacterial epoxy paint and coating material. (POS no: 7.4.1) Dustproof Epoxy Floor Paint

After application of Polymex-50019- Dust-Free Epoxy Floor Paint, in order to maintain the appearance of the surface, the particles spilled on it should be cleaned immediately and cleaned regularly using surface cleaning machines, rotary brushes, high pressure washers, vacuum cleaners and suitable cleaning and polishing materials. Epoxy Based, Two Component, Solvent Free, Floor and Wall Paint Epoxy and polyurethane based floor systems should be applied by specialized applicators.

Equipment Cleaning
Equipment must be cleaned with solvent immediately after use. Cured material can only be cleaned by mechanical means (POS: 7.4.1). Polymex-5019-Dustproof Epoxy Floor Paint

Consumption

Polymex-5019- Dustproof Epoxy Floor Paint, A+B mixture consumption is 0.4-0.6 kg/m² for each coat depending on the surface quality and absorbency. (Poz no: 7.4.1)
*Consumption may also increase as viscosity increases under low temperature conditions. Dustproof Epoxy Floor Paint

Safety Precautions
During use, work clothes, protective gloves and masks should be worn in accordance with Occupational Health and Safety rules. Uncured material has an irritant effect. For this reason, eye, mouth and skin contact should be avoided and the contact area should be washed with plenty of water. In more dangerous situations or if the product is swallowed, a specialist doctor should be consulted immediately. Food and beverages should not be brought into the application areas. Keep out of the reach of children. For detailed information, the Safety Data Sheet (SDS) should be consulted. . Polymex-5019 Non-Dustproof Epoxy Floor Paint

Responsibility
Polymex is solely responsible for the quality of its branded products and has created all the data it offers as a result of practical and scientific studies. Polymex cannot be held responsible except for the use of the right products in appropriate areas and conditions. Polymex-5019 - Dustproof Epoxy Floor Paint

Legal Notes
The information and recommendations for the use of Polymex branded products are provided in good faith, to the best of Polymex's knowledge and experience, under normal conditions and when stored and handled in accordance with Polymex recommendations. The products, as well as their application areas and surfaces, may vary widely. It is necessary to ensure that the correct Polymex branded products are applied under appropriate conditions. In addition, all information and instructions provided by Polymex regarding commercial factors and suitability must be strictly followed. Polymex cannot be held responsible for any damages and problems that may occur if not complied with. The Applicator/User is obliged to perform the relevant tests to ensure these details.
Polymex may change the specifications of its branded products. The property rights of third parties must be observed. When the order is confirmed; all existing technical conditions are essential in terms of sales and transportation. Anti-bacterial epoxy paint and coating material (Pos. no: 7.4.1)

DESCRIPTION AND TECHNICAL SPECIFICATIONS

DUST-FREE EPOXY FLOOR PAINT

1. UNIT PRICE TARIFF MATERIAL APPLICATION FOR DUSTPROOFING ON EXPOSED CONCRETE

(Pose no: 7.4.1)

In the areas specified in the specifications and in accordance with the principle details; All kinds of materials and waste required for the application of UV-resistant, solvent-free, dust-free material that will provide a dust-free effect without preventing the floor from breathing, will not spill in a long time if no other coating is applied on it, and will penetrate without harming health, following the cleaning of floor dirt and dust on the existing gross concrete wall in accordance with the approved sample, M2 price including labor, rent and expenses of vehicles, machinery, equipment to be used for this work, loss, all test operations, correction of faulty manufacturing and / or demolition and reconstruction, transportation in and out of the construction site, horizontal and vertical transportation within the construction site, storage costs, and all other expenses. Dust-free Epoxy Floor Paint

MEASURE : The assembled area is calculated according to the project and approved attachments.

BRAND: POLYMEX-COVER -BASF-JOTUN-

• GENERAL
• PURPOSE

This specification describes the principles of "Dustproof Material Application on Concrete Floor" and includes application details.