High defense resistance against corrosion and chemicals, High film thickness can be obtained by applying in thick layers, Giving a glossy appearance to the surface. Resistant to acids, petroleum products, water and solvents, High mechanical strength against abrasion and impacts, Especially suitable for use in drinking water tanks.

Application : Apply with a short nap roller, comb trowel or Airless Spray.

Application Temperature : Do not apply below +10 °C.

Mixture Lifetime : 1 hour at 20 °C. The higher the amount of mixture and ambient temperature, the shorter the life of the mixture.

Waiting Between Floors : Minimum 12 and maximum 48 hours. If this time period is exceeded, the floor should be roughened with sandpaper for good adhesion.

Drying Time : Surface drying at 20°C: 6-8 hours; complete drying at 20°C: 16-24 hours

Curing : 7 days at 20°C. During this time, the paint film must not be exposed to any chemical and mechanical influences.

Cleanliness: Cleaned with Sellosic Thinner.

Consumption : Theoretically about 400 grams /m in a single layer with a film thickness of 125 microns² (Depends on the roughness of the surface)

Solvent Free Epoxy Paint After mixing the base material, add the hardener and mix for 2-3 minutes until homogenous. The mixture is rested for 15 minutes and then the application is started. Do not prepare more material than the amount that can be applied during the life of the mixture. Epoxy paint gives the viscosity of the mixture application. In solventless epoxy systems, epoxy thinner is not added to the mixture. In order for the Solvent Free Epoxy Topcoat to provide the expected performance, it must have at least 180 μ. It is recommended to be applied as a topcoat on the recommended primers to give a dry film thickness of at least 180 μ. If wet-on-wet application will not be made, 12 hours should be waited for coat acceptance in the second coat application.

Terms of Application

Solvent Free Epoxy Paint Water-based silk matt paints are resistant to mold, fungus and bacteria. Protects the aesthetic appearance of your walls for many years. It is easily cleaned with its washable feature and prevents flame spread. It has the ability to bridge cracks caused by the settlement of the structure over time. New concrete and cement plaster must be cured for at least 21 days. After the mortar residue etc. on the cured surface is removed by light sandblasting or brushing, the selected primer is applied. Loose particles such as old paint, dirt, dust etc. on the old concrete and cement plaster surface are removed by sandblasting, scraping, brushing. Oil and grease residues are cleaned with detergent water, if neutralization is required, the surface is wiped with % 3-4% hydrochloric acid or acetic acid solution and washed with water. Make sure that the surface is completely dry before applying the selected primer.

All technical data contained in this product data sheet are based on laboratory experiments. Actual data may vary due to conditions beyond the control of AŞY POLYMEKS KİMYA SAN TİC LTD ŞTİ. Solventless Epoxy topcoat is a two-component, solvent-free epoxy resin based, glossy, topcoat paint with glossy appearance, follow the instructions for use.