It is applied regularly from floor paint to wall paint to coating. It is used for painting chimney, furnace and engine surfaces. The surfaces to be newly applied must be cleaned very well. Better results are obtained if a thin coat is applied and a second coat is applied on it. 800  ^oIt shows heat resistance up to C. P-50033-Fireproof Epoxy Paint

Specifications:P-5033- Fireproof Epoxy Paint

Excellent adhesion to concrete and wood surfaces. Does not crack, spill or blister. It is used on all kinds of walls and wooden surfaces in the interior of buildings.

Areas of Use: Fireproof Epoxy Paint

• Parking lots and garages
• Balconies and roof guards
• Industrial floors
• Industrial cooling chambers
• Refineries
• Heating pipelines, oil pipelines, gas pipelines
• Water treatment systems
• Asbestos Encapsulation
• Steel Vest
• Shields
• Vehicle Coating
• Headquarters Buildings
• Ammunition Depots
• Blast Mitigation
• Bulletproof Armor
• Residential Buildings
• Wall Guards
• Fortifications
• Sentry Posts
• Coating of Ballistic Places

Fireproof Epoxy Paint It is applied in 2 coats especially on fire escapes, hospitals, schools and airports where the risk of fire is high. When the fire or heat source comes into contact with the surfaces painted with Polymex-5033, the film layer cuts the heat and mass transfer to the main substrate. With the end of the burning materials, the fire ends. It does not carry flame in any way. When a material that burns for 5 minutes during a fire is painted with Polymex-5033-Fireproof Epoxy paint, this period finds 3-4 hours. Fireproof Epoxy Paint

Application Fireproof Epoxy Paint

P-50033 - Fireproof Epoxy Paint; application surfaces should be completely cleaned from moisture, dirt, rust and old paint residues and sanded. It is ready for use and should be applied in layers. There should be at least 3 hours between coats. The temperature of the application surfaces should be +5 ^oIt should be above C. Fireproof Epoxy Paint

Fireproof Paint Drying Time( 18 C)

First drying 3rd hour

Second floor application: 4th hour

Full erection: 24th hour

Notes:  Rules to Consider.

Fireproof Epoxy paint The information in this data sheet is based on our knowledge and experience at the time of printing, which are set out below. The state of knowledge and experience is constantly evolving. Please therefore always use the current version of this data sheet. The product use description in this data sheet cannot take into account special conditions and circumstances that arise in individual cases. Please therefore check the suitability of the coating for the correct intended use in any case before using our product. The application, use and processing of our product are naturally beyond our control. You are therefore solely responsible for these aspects at your own risk, as is the processing result obtained with our knowledge of the application technique. No information in this data sheet constitutes a legal guarantee. It only expressly states that we assume responsibility for the acquisition of the product in accordance with the terms of the contract. All technical data contained in this product data sheet are based on laboratory tests. Actual data may vary due to conditions beyond the control of AŞY POLYMEKS KİMYA SAN TİC LTD ŞTİ. Fireproof Epoxy Paint

P-5033-Fireproof Epoxy Paint is a two-component Fireproof Epoxy Paint based on epoxy resin and silicone resin with antimony trioxside special resin additive. It is resistant to combustion thanks to its silicone antimony trioxside special resin additive. It can be safely applied on surfaces in contact with high temperatures.