It forms a solid and non-slip surface on floors with high abrasive effects. Extremely high chemical and physical resistance. Does not accumulate dust. Easy to clean.

For the field of application

• As a colorful, electrically conductive coating for industrial flooring
• High mechanical and chemical stress (HBV surfaces, ESD surfaces)
• Features excellent flow and deaeration properties
• Electrically conductive (EN 1081, EN 61340-4-1)
• High chemical resistance according to chemical resistance list
• High mechanical strength
• Excellent flow and ventilation characteristics
• High wear resistance
• Free of additives that damage varnish

Technical very criterion standard / Test Specification

Value/ Unit Grades

Bond strength (28 days) EN 1542 > 2.0 MPa

Flexural strength (28 days) EN ISO 178 > 50 MPa

Shore hardness type D DIN 53505-D/EN

ISO 868 76 - 82

Density (mixture 23 °C) EN ISO 2811 1.47 - 1.57 g/cm³

The characteristic values stated are average values or approximate values. Therefore

The natural raw materials contained in our products may show slight variations in the indicated values. Same delivery batch; this does not affect the suitability of the product for its intended use.

Make Systemısı

Lining: Earthing connection: Earthing

Conductive layer 1 x 220W Conductive

conductive wear layer: 1 x polymex-5004- Epoxy Antistatic Condaktive Floor Coating, 0.1-0.3 mm copper grain sand filled

Note: Polymex This system detail must be strictly adhered to and must not be modified.

Polymex P-5004; Epoxy Antistatic Condaktive Floor Coating   In all kinds of floors that require non-slip, high impact and friction resistance, resistance to chemicals, in the cosmetics and pharmaceutical industry.

• Metal manufacturing industry,
• Food manufacturing industry
• Combinations
• Food factories,
• Industrial kitchen
• Manufacturing and assembly industry,
• Offshore platforms,
• Paint factories,
• Textile industry,
• Cold Storage,
• Automotive industry,
• Dairies and farms

Advantagesı

• Electrostatically conductive
• High chemical and mechanical resistance
• Hygienic and easy to clean
• Economic
• Impervious to liquids
• No odor due to being solvent-free
• Glossy, matt and non-slip surface can be achieved.

Surface.Preparation
Epoxy Antistatic Condaktive Floor Coating. Your existing floors are cleaned from concrete grout and oily layer with a concrete milling or grinding machine and made ready for coating with an industrial vacuum cleaner. The cracks and joints on it are opened in a V-shape, cleaned and repaired with epoxy repair mortar.

Yeni beton zeminler en az 21 gün kürlenmiş olması şarttır. Yüzey nemi, sıcaklığı, hava nemi ve sıcaklığı ile beton içi nemi ölçülür. Yüzey nemi en fazla %60, hava sıcaklığı en az 10 ^oC, in-concrete humidity should be maximum %5. The paved areas can be opened to pedestrian traffic after 24 hours and to all kinds of vehicle traffic after 7 days.                                  

Drying:
It takes its first hardness in 3-4 hours, touch hardness in 5-7 hours and full cure after 7 days.

Chemical Resistance

Polymex-5004 was not affected by the following chemicals after 1 week immersion test.

Sülfirik asit %20, Hidroklorik asit %20, Kostik soda %30, Amonyak %30, Asetik asit %10, Laktik asit %15 Benzin, Deniz suyu, Ksilen, Toluen, Ham petrol, Mineral  yağ, Hidrolik yağ, Yağ asitleri, Stiren, Meyve suyu v.s.

Consumption Stages to be Implemented

Technical Information

Chemical Structure :Epoxy Based Epoxy Antistatic Condaktive Floor Coating

Density : Component A: 1.30 kg/l (DIN EN ISO 2811-1)

Component B: : 1.08 kg/l

Resin mixture : 1.20 kg/l 1 : 0.4 filled mixture :1.40 kg/l

All density values are valid for : +23°C.

Solid Content :100% (by volume) / 100% (by weight)

Electrostatic Behavior Resistance to soil conductivity RE < 106-109 Ohm (IEC 61340-4-1; EN 1081) Mechanical/Physical Properties

Compressive Strength Resin: ~ 80 N/mm2 (28 days / +23°C) (EN 196-1)

Flexural Strength Resin: ~ 40 N/mm2 (28 days / +23°C) (EN 196-1)

Bond Strength > 1.5 N/mm² (concrete fracture) (ISO 4624)

Shore D Hardness 81 (3 days / +23°C) (DIN 53 505)

Compressive strength 80 N/mm2

Electric Resistance : 106-109 Ohm Material according to 61340-4-1

Abrasion Resistance 65 mg (CS 10/1000/1000) (8 days / +23°C) (DIN 53 109 (Taber Abrasion Test)) Epoxy Antistatic Condaktive Floor Coating.

Hang in thereım Chemical Resistanceım :

Resistant to many chemicals. Please ask for detailed chemical resistance table.

Effect* Dry Temperature

Continuous +110°C

Short term maximum 7 days +180°C

Short-term maximum 12 hours +180°C

Withstand Thermalım

+80Oc as long as the effect is only rarely, short-lived

Storage.and.Shelf.Lifespan:
Epoxy Antistatic Condaktive Floor Coating :Store in its original, unopened packaging in a cool and dry place for 18 months, under a porch, out of direct sunlight and protected from temperature extremes. In tropical climates, the product should be stored in places with air conditioning. Failure to comply with the recommended storage conditions may cause the product to deteriorate prematurely. Consult our technical department for special storage conditions. Epoxy Antistatic Condaktive Floor Coating.

The system solutions, consumption and products given above are given as an example of calculations based on ideal weather, ambient and ground conditions, taking into account average employer needs. Changes in ambient and ground conditions and employer needs may lead to changes in consumption and system solutions.

For this reason, before the system solution, the place must be seen by the expert staff of POLYMEX Yapı Kimyasalları Sanayi ve Ticaret Ltd. Ști. and / or Expert Practitioner Dealers, the employer's needs must be determined and then the system solution must be applied. All technical data in this product information sheet are based on laboratory tests.

Actual data may vary due to conditions beyond the control of AŞY POLYMEKS KİMYA SAN TİC LTD ŞTİ. Polymex is an electrostatically conductive 2-component epoxy based self-leveling epoxy coating system,