Application Methods: Apply with a short nap roller, comb trowel or Airless Spray.

Application Temperature: Do not apply below +10 °C.

Mixture Lifetime: 1 hour at 20 °C. The higher the amount of mixture and ambient temperature, the shorter the life of the mixture.

Waiting Between Floors: Minimum 16 and maximum 48 hours. If this time period is exceeded, the floor should be roughened with sandpaper for good adhesion.

Drying Time: Surface drying at 20°C: 6-8 hours; complete drying at 20°C: 16-24 hours

Curing 7 days at 20°C. During this time, the paint film must not be exposed to any chemical and mechanical influences.

Thinning and Cleaning: When used as a primer on absorbent concrete surfaces, dilute with % 15 special thinner by weight.

Consumption: Theoretically about 4 kg/m2 in a single layer with a film thickness of 125 microns (varies depending on the roughness of the surface).

Areas of Use

It is used as floor and wall coating in refineries, petrochemical and other industrial establishments, ports and shipyards, drinking water and fuel tanks, treatment and wastewater plants, wine storage tanks, food industry, hospital and pharmaceutical industry, laboratory, textile and automotive industry in order to protect concrete and metal surfaces from atmospheric and chemical effects.

Application

After mixing the base material, add the hardener and mix for 2-3 minutes until homogenous. After resting the mixture for 15 minutes, start application. Do not prepare more material than the amount that can be applied during the life of the mixture.

Terms of Application
New concrete and cement plaster should be cured for at least 21 days. After the mortar residue etc. on the cured surface is removed by light sandblasting or brushing, the selected primer is applied. Loose particles such as old paint, dirt, dust etc. on the old concrete and cement plaster surface are removed by sandblasting, scraping, brushing. Oil and grease residues are cleaned with detergent water, if neutralization is required, the surface is wiped with % 3-4% hydrochloric acid or acetic acid solution and washed with water. Make sure that the surface is completely dry before applying the selected primer.

Polyurea Insulation Restrictions:
The packaging must not be opened until the components are used.

Polyurea Insulation Notes
All technical data contained in this product data sheet are based on laboratory experiments. Actual data may vary due to conditions beyond the control of AŞY POLYMEKS KİMYA SAN TİC LTD ŞTİ.

All technical data contained in this product data sheet are based on laboratory experiments. Actual data may vary due to conditions beyond the control of AŞY POLYMEKS KİMYA SAN TİC LTD ŞTİ. Polyurea Primer is used for Polyurea - Epoxy - Polyurethane Floor Coating and Insulation Floor Primer. The floor is cleaned and 250-300.gram per m2 should be applied to the cleaned floor. Insulation or floor covering materials are used on it. Polyurea Floor Primer is used in risky areas. Depending on the seasonal conditions and the structure of the usage area, primer with different properties is used.