Anti-Slip Epoxy Topcoat Floor Paint

Technical Information

Chemical Structure :Epoxy Based Floor Coating

Density : Component A: 1.40 kg/l (DIN EN ISO 2811-1)

Component B: : 1.08 kg/l

Resin mixture : 1.40 kg/l 1 : 0.4 filled mixture : ~ 1.75 kg/l

All density values are valid for : +23°C.

Solid Content ~:100% (by volume) / ~100% (by weight)

Electrostatic Behavior conductivity strength RE < 106 Ohm (IEC 61340-4-1; EN 1081) Mechanical/Physical Properties

Compressive Strength Resin: ~ 80 N/mm2 (28 days / +23°C) (EN 196-1)

Flexural Strength Resin: ~ 40 N/mm2 (28 days / +23°C) (EN 196-1)

Bond Strength > 1.5 N/mm² (concrete fracture) (ISO 4624)

Shore D Hardness 81 (3 days / +23°C) (DIN 53 505)

Abrasion Resistance 65 mg (CS 10/1000/1000) (8 days / +23°C) (DIN 53 109 (Taber Abrasion Test)) Epoxy Floor Coating. - Anti-Slip Epoxy Topcoat Floor Paint

Hang in thereım Chemical Resistanceım :

Resistant to many chemicals. Please ask for detailed chemical resistance table.

Effect* Dry Temperature

Continuous +135°C

Short term maximum 7 days +180°C

Short-term maximum 12 hours +180°C

Withstand Thermalım

Effect only rarely, as long as short duration +180°C

Curing

7 days at 20°C. During this period, the paint film should not be exposed to any chemical and mechanical effects. Polymex-5063- Anti-Slip Epoxy Topcoat Floor Paint

Thinning and Cleaning:

When used as a primer on absorbent concrete surfaces, dilute with % 15 special thinner by weight.

Consumption:
Theoretically about 500.gram/m in a single layer with a film thickness of 300 microns² (Depends on the roughness of the surface) Anti-Slip Epoxy Topcoat Floor Paint.

Storage and Shelf Life:
1 year in original unopened packages in a humidity-free indoor environment at 10-35°C.

Packaging:
Non-Slip Epoxy Topcoat Floor Paint: 5 kg, 20.kg and 25 kg in sets.

Implementation: Anti-Slip Epoxy Topcoat Floor Paint After mixing the main material, add hardener and mix for 2-3 minutes until homogenous. After resting the mixture for 5 minutes, start the application. Do not prepare more material than the amount that can be applied during the life of the mixture. P-5063- Anti-Slip Epoxy Topcoat Floor Paint

Terms of Application:New concrete and cement plaster should be cured for at least 21 days. After the mortar residue etc. on the cured surface is removed by light sandblasting or brushing, the selected primer is applied. On steel and tanks, paint can be applied 12 hours after the epoxy primer is applied. Loose particles such as old paint, dirt, dust, etc. on the old concrete and cement plaster surface are removed by sandblasting, scraping, brushing. Oil and grease residues are cleaned with detergent water, if neutralization is required, the surface is wiped with % 3-4% hydrochloric acid or acetic acid solution and washed with water.

Make sure that the floor is completely dry before applying the selected primer. Polymex-5063- Anti-Slip Epoxy Topcoat Floor Paint

Application Methods: Apply with a short nap roller, comb trowel or Airless Spray.

Application Temperature: Do not apply below +10 °C.

Mixture Lifetime: 1 hour at 20 °C. The higher the amount of mixture and ambient temperature, the shorter the life of the mixture.

Waiting Between Floors: Minimum 16 and maximum 48 hours. If this time period is exceeded, the floor should be roughened with sandpaper for good adhesion. Anti-Slip Epoxy Topcoat Floor Paint.

Drying Time:

Surface drying at 20°C: 6-8 hours; complete drying at 20°C: 16-24 hours

Anti-Slip Epoxy Topcoat Floor Paint

Areas of Use

Non-Slip Epoxy Topcoat Floor Paint It is used in refineries, petrochemical and other industrial establishments, ports and shipyards, drinking water and fuel tanks, treatment and wastewater plants, wine storage tanks, food industry in order to protect concrete and metal surfaces from atmospheric and chemical effects on floors where stairs, pool edges, non-slip is required, It is used in factories, assembly workshops, warehouses, aircraft hangars, stores, parking lots, food facilities, hospitals, chemical and pharmaceutical industries, power plants, units where hygiene is required, all industrial floors in industrial facilities where floor dusting affects production, such as hospitals and pharmaceutical industries, laboratories, textile and automotive industries. It is used as epoxy top coat non-slip floor paint with high mechanical strength and abrasion resistance, easy to clean, rough surface for metal, wood and concrete surfaces. Used as non-slip floor and wall coating.

Epoxy resin based paint types are also available. Epoxy paint is seriously resistant to all kinds of chemical or physical interactions. It gives a semi-matte appearance. It is preferred in topcoat paints due to its durability. It can be easily applied on metal surfaces and concrete. Its durability shows an extremely strong resistance to effects such as sea water and acid. It is widely used in ports and industrial facilities due to the fact that its effect on metal has a very strong resistance. Epoxy paint is a kind of coating process applied as a topcoat. It is used in many areas due to its dust-repellent feature, water resistance and easy repair and repair. Epoxy paint topcoat processes are a highly preferred application type on wooden floors with appropriate primer application. The primed surfaces become suitable for the top coat paint process after 24 hours of waiting.

It should not be touched for 45-50 minutes after application. Hardening time will take place after an average of 24 hours. Anti-Slip Epoxy Topcoat Floor Paint

It enters the complete drying phase within 4 to 7 days. It should be used expertly and left to dry with care. This is how you can get full efficiency. The environment should be well ventilated during the application phase. In addition, it is absolutely necessary for the people who apply it to do their work by wearing a mask. Direct inhalation during application is not recommended.

SAFETY:

Do not inhale the product, use a mask. Avoid contact with skin and eyes. Wear protective gloves, goggles and clothing. In case of eye contact, consult a doctor immediately. Keep out of the reach of children. In case of skin contact, wash with plenty of soap and water. Do not swallow. Please refer to the Safety Data Sheet for detailed information and recommendations. Non-Slip Epoxy Topcoat Floor Paint.

Note All technical data contained in this product data sheet are based on laboratory experiments. Actual data may vary due to conditions beyond the control of POLYMEX KİMYA SAN TİC LTD ŞTİ. Non-Slip Epoxy Topcoat Floor Paint.

Polymex San. ve Tic. Ltd. Şti. is not responsible. Polymex reserves the right to change its products. Users should refer to the latest edition of the Technical Data Sheet of the relevant product.